Factory image......\\ar-ebios-03\BIOS\ROM\P\Server\2011-3B\FH-C612NM\FH612NM2.10 (0x23C0)


;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 207
BIOS Version	: L2.07
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01. Synchronize code with EP2C612D16FM L2.21 (From EP2C612D16FM L2.17) >>>

01.[Change]
Request By: BIOS RD Nick
Changed: Hide BIO Setup Item "Fan Control" Option [Auto]/[Manual] when Chassis_ID change to 1~6.
Verify By: BIOS QT
Test Proposal: When Chassis_ID is not  setting on Channel model(0x7),  "Fan Control" Option and all Fan Control Item should be hidden.

02.[Changed]
Request By: BIOS RD Nick
Changes: Support 4K Native HDD.
Verify By: BIOS QT
Test Proposal:   Check storage info HDD size is correct as plugging 4K Native supported HDD.

(2) Note
    1. BIOS image filename: FH612NM2.07
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 11:00 Thu 03-31-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 206
BIOS Version	: L2.06
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01. Synchronize code with EP2C612D16FM L2.17 (From EP2C612D16FM L2.15) >>>

01.[Fixed]
Report By: EP2C612D16-2L2T[0190]
Symptom: Without BMC Self Test Status item.
Solution: Add BMC Self Test Status item.
Verify By: BIOS QT
Test Proposal: Check this symptom.

02.[Change]
Request By: BIOS Leader Eddie
Changed: Add BIO Setup Item "Fan Control" Option [Auto]/[Manual].
If [Auto] is selected, the fan speed will controlled by BMC and all Fan Control Item will be hidden.
If [Manual] is selected, all Fan Control Item  will disply and BIOS can Control it.
If Chassis_ID change to 1~6, the fan speed will controlled by BMC and all Fan Control Item will be hidden no matter [Auto] or [Manual] is selected.
Verify By: BIOS QT
Test Proposal: 
Fan Control Item:
1.When [Auto] is selected, all Fan Control Item should be hidden.
2.When [Manual] is selected, all Fan Control Item should be display and BIOS can Control it. 
3.When Chassis_ID is not 0x7, all Fan Control Item should be hidden and "Fan Control item" is garyout.

03.[New]
Report By: BMC RD Katiness
Changed : Add "DetectPCIE" function.
Verify By: N/A
Test Proposal:  N/A

04.[New]
Report By: HW RD Ping-Yu
Changed : Add Auto Above4G Support Card(Nvidia Tesla K80,K40,M60)
Verify By: N/A
Test Proposal:  N/A

(2) Note
    1. BIOS image filename: FH612NM2.06
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 12:00 Wed 03-30-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 205
BIOS Version	: L2.05
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

-Synchronize code with EP2C612D16FM L2.15 (From EP2C612D16FM L2.14)
01.[Change]
Request By: BIOS RD Leader Eddie
Changes: Update Broadwell-EP microcode to "406F1_0B000014".
Verify By: N/A
Test Proposal: N/A

(2) Note
    1. BIOS image filename: FH612NM2.05
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	:  17:00 Wed 02-17-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 204
BIOS Version	: L2.04
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01. Synchronize code with EP2C612D16FM L2.14 (From EP2C612D16FM L2.13)

01.[Fixed]
Report By: Server QT
Symptom: TPM BitLock fail.
Solution: Update TPM32BIN.bin and MPTPM.bin in TCG2 module.
Verify By: Server QT
Test Proposal: Check this symptom.

02.[Fixed]
Report By: EP2C612D16FM[0238]
Symptom: Memory information fail.
Solution: fix channel info for DRAM not in MemoryModuleManufacturerList. 
Verify By: Server QT
Test Proposal: Check this symptom.

03.[Fixed]
Report By: EP2C612D8HM [0088]
Symptom: Connect "XEON-PHI" device , system will reboot about 12 times.
Solution: Early detection Xeon Phi device.
Verify By: N/A
Test Proposal: N/A

04.[Fixed]
Report By: EP2C612D24-4L [107]
Symptom: Onboard Debug Port LED set "Auto",check S4 state debug display.
Solution: Add Code to light on 80 port when OS sleep entering S4 state
Verify By: BIOS QT
Test Proposal:  Check this symptom.

05.[Fixed]
Report By: EP2C612D24-4L [108]
Symptom: 
Plug SATA & PCIE M2 and check boot option result as below:
1.SATA M.2 ->Ultra M.2 :XXXXXX
2.PCIE M2 -> M_SATA_1:XXXXXX
Solution: Change M.2 option titles when SATA or PCIE M.2 device pluging on. 
Verify By: BIOS QT
Test Proposal: Check this symptom.
1.SATA M.2 ->M.2(SATA):XXXXXX
2.PCIE M.2  ->Ultra M.2:XXXXXX

(2) Note
    1. BIOS image filename: FH612NM2.04
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 18:00 Mon 02-15-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 203
BIOS Version	: L2.03
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01.[New]
Report By: HW RD Ping-Yu
Changed : Add Spec. on "Detect riser ID to switch PCIE Link width" function to Support "RB2U2G-16L" and "RB2U2G-16".
Verify By: H/W
Test Proposal:  N/A

02.[Changed]
Request By: SI Marco
Change: Modify the Gen3 TX De-emphasis to -7dB for Sata port 2 , 5 and sSATA port 0.
Verify By: SI Marco
Test Proposal: N/A

03.[Changed]
Request By: BIOS RD Klause Liu
Changes: ChassisID module update to L1.07
Verify By: N/A
Test Proposal: N/A

(2) Note
    1. BIOS image filename: FH612NM2.03
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 18:00 Fri 01-15-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 202
BIOS Version	: L2.02
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01. Synchronize code with EP2C612D16FM L2.13 (From EP2C612D16FM L2.09M)

(2) Note
    1. BIOS image filename: FH612NM2.02
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 17:00 Wed 01-13-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 201
BIOS Version	: L2.01
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01. Base on EP2C612D16FM BIOS Build: L2.09L to modify.
- Update RC Code to support Broadwell-EP.

02. Base on EP2C612D16FM BIOS Build: from L2.09L to L2.09M update to modify below.

01.[Fixed]
Report By: EP2C612D16FM[0289] 
Symptom: PCI-E ASPM Support (Global) fail.
Solution: Set default value of "PCI-E ASPM" per port to "Disabled".
Verify By: BIOS QT
Test Proposal: Check this symptom.

02.[Fixed]
Report By: EP2C612D16FM[0296] 
Symptom: Plug UEFI OS HDD (Win 8.1 x64) , press F11 boot to menu check SATA and sSATA channel hard disk info.
Solution: Remove "UEFI OS" string token from EfiOsBootOptionNamesFilePathItem.
Verify By: BIOS QT
Test Proposal: Check this symptom.

03.[Fixed]
Report By: EP2C612D16FM[0282] 
Symptom: ECC Support set "Disabled" F10 Save and Exit , system will hang , check 80 port display "79h".
Solution: Set HomeDirWOSBEn = "0" when ECC support disable.
Verify By: BIOS QT
Test Proposal: Check this symptom.

04.[New]
Request By: BIOS RD Nick
Changed : Add HWPM item in BIOS SETUP.
Verify By: BIOD QT
Test Proposal: 
1.Set "Enable CPU HWPM" to "HWPM OOB MODE" in BIOS SETUP and use PTU to check CPU frequency, the result will not affect by power option policy in OS.   
2.Set "Enable CPU Autonomous Cstate" to "Enabled" and use SRMT to check Cstate, the result will not affect by other C state items in BIOS SETUP.      

(2) Note
    1. BIOS image filename: FH612NM2.01
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 19:30 Sun 12-27-2015