Factory image......\\ar-ebios-03\BIOS\ROM\P\Server\2011-3B\FH-C612NM\FH612NM2.20 (0xAB7A)

;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 213
BIOS Version	: L2.16
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01.[Fixed]
Report By: HW RD Eric Hu
Symptom: "PCI out of resource" detected as Nvidia Tesla GRID Card M10 plugging wtih
"Above 4G Decoding" item sets [Auto].
Solution: Add Nvidia Tesla GRID Card M10 to "Above 4G Decoding" item [Auto] support list.
Verify By: BIOS QT
Test Proposal: 
Check "PCI out of resource detected"  information does not appear 
when motherboard plug Nvidia Tesla GRID Card M10 with "Above 4G Decoding" item setting [Auto].

(2) Note
    1. BIOS image filename: FH612NM2.16
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 10:00 Fri 07-01-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 212
BIOS Version	: L2.15
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01.[Changed]
Report By: HW RD Ping-Yu
Changed : Change Rx value of PCH SATA_1  from 5 to 7 for 2U4FH-12L request.
Verify By: Server QT 
Test Proposal:  Check this symptom.

(2) Note
    1. BIOS image filename: FH612NM2.15
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 14:30 Mon 06-13-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 211
BIOS Version	: L2.14
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01. Synchronize code with EP2C612D16FM L2.36 (From EP2C612D16FM L2.31)

01.[Change]
Request By: BIOS RD Nick
Changes: Add Setup item "Numa" in "IntelRCSetup\Memory Configuration".
Verify By: BIOS QT
Test Proposal:Check this function with BCK.

02.[Change]
Request By: BIOS RD Nick
Changes: Add "MMIO High Base", "MMIO High Size" item and change default value.
1.Set "Mmio High Size" default value to 1024GB.
2.Set "Mmio High Base" default value to 2TB. 
3.Set #define MMIOH_BASE to 0x3800(QpiSi.h).
Verify By: BIOS QT
Test Proposal:
1.Plug in XEON PHI PCIE card and check RU, Prefetchable memory base is 0x38xx00000000.
2.Change "MMIO High Base" setting in BIOS SETUP and use RU to check Prefetchable memory base will be changed as bellow:
1T->0x1xx00000000
2T->0x2xx00000000(default)
4T->0x4xx00000000
16T->0x1xxx00000000
24T->0x18xx00000000
40T->0x28xx00000000
56T->0x38xx00000000

(2) Note
    1. BIOS image filename: FH612NM2.14
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 21:00 Mon 05-30-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 210
BIOS Version	: L2.13
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01.[Fixed]
Report By: FH-C612NM [135]
Symptom: M2 SATA share with SATA,check PCH Configuration show ¡¨SATA Mode Selection"
Solution: Modify above item name correct:
"SATA Mode Selection" => "SATA/M.2_SATA Mode Selection"
"M.2(SATA) (AHCI) :HDD Name" => SATA_1(AHCI)¡GHDD Name
Verify By: BIOS QT
Test Proposal: Check above item name correct.

(2) Note
    1. BIOS image filename: FH612NM2.13
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 11:00 Tue 05-10-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 209
BIOS Version	: L2.12
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01.[Changed]
Report By: HW RD Ping-Yu
Changed : Change PCH SATA 2 and 5,  sSATA 0 and 3 Rx value from 5 to 7. 
Verify By: Server QT 
Test Proposal:  Check this symptom.

02.[Changed]
Request By: HW RD Ping-Yu
Change: Modify the Gen3 TX De-emphasis to -7dB for sSATA port 3.
Verify By: SI Marco
Test Proposal: N/A

(2) Note
    1. BIOS image filename: FH612NM2.12
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 10:00 Wed 05-04-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 208
BIOS Version	: L2.11
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01. Synchronize code with EP2C612D16FM L2.31 (From EP2C612D16FM L2.21) >>>
01.[Fixed]
Report By: BIOS QT
Symptom: Micron DDR4 LR-DIMM show "R-DIMM" in BIOS memory information.
Solution: Use variable "lrDimmPresent" to get the correct LR-DIMM information.   
Verify By: BIOS QT
Test Proposal: Check this symptom.

02.[New]
Report By: BIOS Leader Eddie
Changes: Add "PlatformAttribute" module part for ASRock Rack project.
Verify By: BIOS QT
Test Proposal: Check AAFTbl table with PlatformAttribute information is ASRock Rack.
Synchronize code with EP2C612D16FM L2.31 (From EP2C612D16FM L2.21) <<<

03.[Changes]
Request By: BIOS RD Nick
Changes: Update NTFS module and add AAFT table for wIFUPack utility and Win Server 2016.
Verify By: BIOS QT
Test Proposal:
1.Flash bios to L2.07 and enter Win Server 2016
2.Run windows flash update L2.07 ,check there has warring message
  and system can not update bios.
3.Flash bios to L2.11 and enter Win Server 2016
4.Run windows flash update L2.11 ,check there has not warring message
  and update bios successfully.

(2) Note
    1. BIOS image filename: FH612NM2.11
    2. BMC firmware version: FH-C612NM_P0.07.00.ima

Engineer Name	: Max Chen
Release Date	: 21:00 Thu 04-21-2016