Factory image......\\ar-ebios-03\BIOS\ROM\P\Server\2011-3B\FH-C612NM\FH612NM2.60 (0xB926)

;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 220
BIOS Version	: L2.53
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01.[Fixed]
Report By: TSD
Symptom: system may be hang 0x78 or 0x79 when insert one invalid Log to ERROR_LOGGING which length is 0.
Solution: Reinitialize SMBIOS eventlog table when detect invalid Log which length is 0.
Verify By: BIOS QT
Test Proposal: 
1.Copy \\ar-ebios-03\BIOS\ROM\L\Server\2011-3B\FH-C612NM\TEST\BIOSQT\ERROR_LOG\FH612NM252_ERRORLOG.bin to the FV_ERROR_LOGGING region of BIOS 2.52->system will hang 0x78 or 0x79.
2.Copy \\ar-ebios-03\BIOS\ROM\L\Server\2011-3B\FH-C612NM\TEST\BIOSQT\ERROR_LOG\FH612NM253_ERRORLOG.bin to the FV_ERROR_LOGGING region of BIOS 2.53->system can boot normally.

02.[Fixed]
Report By: H/W Eric.
Symptom: TPMTEST fail.
Solution: TPM State default value set to Disabled.
Verify By: H/W and Server QT.
Test Proposal: Check this symptom.
AmiModulePkg\TCG2\Common\Setup\TcgSetup.sd

(2) Note
    1. BIOS image filename:   FH612NM2.53
    2. BMC firmware version: FH-C612NM_P0.07.00.ima
		              2U2G_L1.03.00.ima	

Engineer Name	: Max Chen
Release Date	: 22:30 Thu 04-20-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 219
BIOS Version	: L2.52
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01.[Changed]
Request By: BIOS RD Nick
Changed : Upgade "SlotOpRom" module(V1.0.2) to support .
Verify By: BIOS QT
Test Proposal: 
1.Use "LSI-SAS9271-8i" and "LAN-E-PCI-INTEL-X540-T2" for "PCIEX Slot OpROM" item test.
2.Plug in "LSI-SAS9271-8i" and "LAN-E-PCI-INTEL-X540-T2" to check "PCIEX Slot OpROM" item can control Storage and Network cardOption ROM policy.
(1)Set [AUTO] and with "LSI-SAS9271-8i" card, system will execute LSI Legacy Oprom.
(2)Set [Legacy] and with "LSI-SAS9271-8i" card, system will execute LSI Legacy Oprom.
(3)Set [UEFI] and with "LSI-SAS9271-8i" card, BIOS SETUP Advanced page will show "LSI MegaRAID..." sub page.
(4)Set [Disabled] and with "LSI-SAS9271-8i" card, system will not execute LSI Legacy Oprom and show "LSI MegaRAID..." sub page.
(5)Set [AUTO] and with "LAN-E-PCI-INTEL-X540-T2" card, system will execute PXE Legacy Oprom.
(6)Set [Legacy] and with "LAN-E-PCI-INTEL-X540-T2" card, system will execute PXE Legacy Oprom.
(7)Set [UEFI] and with "LAN-E-PCI-INTEL-X540-T2" card, boot to SHELL and execute "drivers" will show "Intel 10GbE DEV BUILD 3.1.06 EFIx64 Offset...".
(8)Set [Disabled] and with "LAN-E-PCI-INTEL-X540-T2" card, system will not execute PXE Legacy Oprom and  boot to SHELL and execute "drivers" will not show "Intel 10GbE DEV BUILD 3.1.06 EFIx64 Offset..."
3.Set SATA to RAID mode and launch Storage OpROM policy to UEFI only and connect 2 SATA HDD to Intel SATA port, check the Intel UEFI RAID driver is installed.
4.Plug in Addon VGA card, set "PCIEX Slot OpROM" item to disable, check system still can light form VGA card.

02.[Fixed]
Report By: TSD CC Chen
Symptom: M.2 Information has no display on BIOS Setup\Advanced\Storage Configuration page with Samsung 950 Pro. 
Root Cause: Execute M.2 Samsung 950 Pro OpRom makes get information failed.
Solution: 
1.Add [M.2 Slot OpRom] item to control M.2 Slot OpRom exection or not.(It needs "SlotOpRom" module(V1.0.2) or latest version )
2.Update  "ATAIdentify" Module to support NVMe M.2 information display.
Verify By: BIOS QT
Test Proposal: Plug M.2 Samsung 950 Pro on M.2 slot, and check informformation correct on BIOS Setup\Advanced\Storage Configuration page.

03.[Changed]
Report By: FH-C612NM Spec.
Changed : Add "Easy RAID Installer" item on Advanced page.
Verify By: Server QT 
Test Proposal:  Check this symptom.

(2) Note
    1. BIOS image filename:   FH612NM2.52
    2. BMC firmware version: FH-C612NM_P0.07.00.ima
		              2U2G_L1.03.00.ima	

Engineer Name	: Max Chen
Release Date	: 21:30 Thu 01-05-2016
;-----------------------------------------------------------------------;
Project Name	: FH-C612NM
Project Build	: 218
BIOS Version	: L2.51
BIOS Revision : 

BIOS Changes    :

(1) Modifications:

01.[Fixed]
Report By: BIOS RD Nick
Symptom: Can not boot after add display BMC IP address.
Solution: Change execute order of display BMC IP address function.   
Verify By: BIOS QT
Test Proposal: Check this symptom.

02.[Fixed]
Report By: HW RD Bruce
Symptom: Shut down system will frozen with "PCIE Device Power On" [Enabled] and pluging in addon LAN Card Broadcom G21 .
Cause: Writing Broadcom G21 CapReg on "PCIE Device Power On" function will make system forzen.
Solution: Skips writing Broadcom G21 CapReg on "PCIE Device Power On" function. 
Verify By: BIOS QT
Test Proposal: 
1. Plug addon LAN Card Broadcom G21 on any CPU 1 PCIE slot.
2. Setup "PCIE Device Power On" [Enabled] with saving and back to BIOS Setup.
3. Shut down System by power button, and check system not forzen.

(2) Note
    1. BIOS image filename:   FH612NM2.51
    2. BMC firmware version: FH-C612NM_P0.07.00.ima
		              2U2G_L1.03.00.ima	

Engineer Name	: Max Chen
Release Date	: 17:00 Tue 11-08-2016