+----------------------------------------------------------------------+ | BIOS Release History | +----------------------------------------------------------------------+ | Project Name : EP2C621D12 WS | | CPU : Skylake-SP | | Chipset : CASCADELAKE | | Super I/O : NCT5573D | | BMC : AST2500 | | Flash Part : Winbond W25Q256JVFQ | | : MXIC MX25L25635FMI-10G | +----------------------------------------------------------------------+ | [VGA] | | ASPEED VGA (Legacy) : 1.08.00 | | (UEFI) : 1.08.00 | | [Storage] | | Intel RAID : 7.8.0.1012 | | SATA RAID : 7.8.0.1012 | | [LAN] | | Intel X722 (PXE) : v1.0.66 | | (UEFI) : v3.0.05 | | [Others] | | DCPMM Drirvers : 01.00.00.3536 | | Audio SSID : 5892 | +----------------------------------------------------------------------+ | RC Version : 0626.P01 | | SPS FW Version : 04.01.04.901 | +----------------------------------------------------------------------+ | Redfish Version : N/A | | Support Redfish Inventory : No | | Redfish Inventory Version : N/A | +----------------------------------------------------------------------+ | CPU Microcode | | SKX-H0 : 50654_02006E05 | | CLX-A0 : 50655_03000012 | | CLX-B0 : 50656_04003303 | | CLX-B1 : 50657_05003303 | +----------------------------------------------------------------------+ | Update Tool : wIFUPack | | : AfuEfix64 v5.11.00.1727 | | : AFUWINx64 v5.11.00.1727 | | : afulnx_64 v5.11.00.1727 | | Support Tool : SceEfi v5.03.1111 | | : SceLnx v5.03.1111 | | : SceWin v5.03.1111 | +----------------------------------------------------------------------+ | Aptio 5.014 | | VeB Version : Aptio 7.19.0628 (A5 33) | +----------------------------------------------------------------------+ | MFG (Yes/No) | | 1. No BMC 90 second count : Yes | | 2. No FRU update : Yes | | 3. No backup BMC MAC : Yes | | 4. No OOB control : No | | 5. No PXE option : No | | 6. Enable CSM legacy boot : No | | 7. Disable console redirection : No | | 8. No PHY MAC backup/restore : Yes | | 9. Disable EMS : Yes | | 10. No Redfish feature : No | +----------------------------------------------------------------------+ | ASRR Project GUID | | {0xfef04810,0x112a,0x4083,{0x90,0xe4,0x5d,0xe1,0xec,0x29,0x78,0x96}}| +----------------------------------------------------------------------+ +-----------------------------------------------------------------------+ BFG Protected Setup Items +-----------------------------------------------------------------------+ BCLK Frequency VcoreMode VcoreFix VcoreOffset VcorePhase ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 223 BIOS Version : L2.23 BIOS Changes : (1) Modifications: 01.[Fixed] Report By: BIOS Leader Eddie Symptom: Device Manager will show yellow mark under Windows 2022. Root Cause: Remove SMBIOS Type 38, 41. Solution: Doesn't remove SMBIOS Type 38, 41. Verify by: BIOS QT Test Proposal: Check Device Manager > System Devices > Microsoft Geneic IPMI Compliant Device doesn't have yellow mark. 02.[Fixed] Symptom: KCS control set [Disabled] cause yellow mark in Windows. Solution: Disable IPMI device in OS when KCS set disable. Verify: BMC QT Test Proposal: 01. Boot to BIOS setup and set the item "KCS control" to "Disabled"(Sever Mgmt->BMC Tools) 02. Boot to Windows and send IPMI command by IPMI tool, it will return fail or timeout. 03. Check Device Manger do not see IPMI device. 01. Boot to BIOS setup and set the item "KCS control" to "Enabled"(Sever Mgmt->BMC Tools) 02. Boot to Windows check it can success to send IPMI command by IPMI tool. 03. Check Device Manger can see IPMI device but do not have yellow mark. (2) Note 01. BIOS image filename: 2P621WS2.23 Engineer Name : Levi Yang Release Date : Mon 01-30-2023 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 222 BIOS Version : L2.22 BIOS Changes : (1) Modifications: 01. [RC code update] Description: Sync code with AMI PurleyRefreshCrb_058(RC v0626.P01, IPU 2023.1). 02. [Change] Request By: TSD Andrew Changes: Disable G3Wake component, due to SUT auto wakeup after G3 and enable PCIe device power on. Verify: TSD Test Proposal: Check this symptom. 03. [Changed] Request By: BIOS RD Rany Changed: Update Server module(AsrrInfoReport, ChassisId, FruToSmbios123ByPcd) follow ASRR rule. Verify by: BIOS QT. Test Proposal: Please check Post, SMBIOS sync fru function behavior 04. [Changed] Request By: BIOS RD Rany Changed: Update Mac2UUID module follow ASRR rule (EP2C621D12 WS GUID {0xfef04810,0x112a,0x4083,{0x90,0xe4,0x5d,0xe1,0xec,0x29,0x78,0x96}}). Verify by: BIOS QT. Test Proposal: Please check smbios UUID. 05. [Changed] Request By: BIOS RD Rany Changed: Update Mirror mode and ASPM policy option string. Verify by: BIOS QT. Test Proposal: Check this symptom. 06. [Changed] Request By: BIOS RD Rany Changed: Update VLAN default match BMC. Verify by: BIOS QT. Test Proposal: Check this feature. (2) Note 01. BIOS image filename: 2P621WS2.22 Engineer Name : Levi Yang Release Date : Tue 01-17-2023 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 221 BIOS Version : L2.21 BIOS Changes : (1) Modifications: 01. [Fixed] Report By: TSD Kevin & BMC Andy Symptom: BMC inventory show only 32GB at 64GB DIMM. Root Cause : UpdateFruInfo module not use Type17 ExtendedSize sending size of 32GB above DIMM. Solution: If Type17 Size equal to 0x7FFF than send ExtendedSize to Fru. Verify By: TSD Kevin. Test Proposal: 1.Plug 64GB DDR4-LR DIMM on board. 2.Boot into BIOS setup. 3.Check BMC inventory show correct size of DIMM on web page. (2) Note 01. BIOS image filename: 2P621WS2.21 Engineer Name : Levi Yang Release Date : Mon 11-01-2021 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 220 BIOS Version : P2.20 BIOS Changes : (1) Modifications: 01. [P BIOS Release] Base on L2.17 (2) Note 01. BIOS image filename: 2P621WS2.20 Engineer Name : Levi Yang Release Date : Tue 10-19-2021 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 217 BIOS Version : L2.17 BIOS Changes : (1) Modifications: 01. [RC code update] Description: Sync code with AMI PurleyRefreshCrb_052(RC v0610.D02 , 2020.2 IPU PV). 02. [Changed] Request By: BIOS Eddie. Changed: Add setup item "PCIe Device Degrade ELog Support" to enable or disable sending degrade log to BMC. Verify by: BIOS QT. Test Proposal: 0. The setup item location : "Server Mgmt" -> "System Event Log" -> "PCIe Device Degrade ELog Support" 1. Clear BMC ipmi log page. 2. Plug a bus failed PCIe card. 3. Check there is no degrade log in BMC ipmi log page. 4. Set setup item "PCIe Device Degrade ELog Support" as "Enabled". 5. Check there is degrade log in BMC ipmi log page. 03. [Fixed] Report By: EP2C621D12 WS BUG[0215] Symptom: Factory DIMM test fail, DIMM Show connt=16 no match Root Cause : Type 16 porting error Solution: Type 16 set to correct value. Verify By: QTC. Test Proposal: Check the symptom. 04. [Changed] Request By: BIOS Rany Changed: Modify SMBios UUID sync code. Verify by: BIOS QT. Test Proposal: Check can using AsrMgmtInfo to modify UUID. (2) Note 01. BIOS image filename: 2P621WS2.17 Engineer Name : Levi Yang Release Date : Tue 01-19-2021 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 216 BIOS Version : L2.16 BIOS Changes : (1) Modifications: 01. [Change] Request by: BIOS RD Rany. Changes: [RC code update] Sync code with AMI PurleyRefreshCrb_051 Description: For fixing CVE-2020-0543 and CVE-2020-0549 Verify by: BIOS QT Test Proposal: Check uCode was same as history. (2) Note 01. BIOS image filename: 2P621WS2.16 Engineer Name : Levi Yang Release Date : Tue 08-25-2020 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 215 BIOS Version : L2.15 BIOS Changes : (1) Modifications: 01. [RC code update] Description: Sync code with AMI PurleyRefreshCrb_050(RC v0602.D02, BKC 2020_WW07 - IPU 2020.1). 02. [Change] Request by: BIOS RD Rany. Changes: Add item "Secure Boot State". Verify by: BIOS QT Test Proposal: Check Secure Boot. 03. [Change] Request by: BIOS RD Rany. Changes: Follow new user password rule of sub-page and items grayout behavior. Verify by: BIOS QT Test Proposal: Check User password. 04. [Change] Request by: BIOS RD Rany. Changes: Add F6 Hot key information to BIOS POST screen. Verify by: BIOS QT Test Proposal: Check BIOS POST screen. 05. [Change] Request By: BIOS RD Rany Changed: Update "FruToSmbios123ByPcd" module version up to v009.000. Verify: BIOS QT Test Proposal: Check SMBIOS sync FRU feature is working. 06. [Change] Request By: BIOS RD Eddie Changed: Update BMC tools module and support KCS control. Verify: BIOS QT Test Proposal: IPMI acess be reject when KCS control set disable at OS phase. 07. [Change] Request By: BIOS RD Eddie Changed: Update IPMI HW Monitor module and remove fan control item. Verify: BIOS QT Test Proposal: Check BIOS without fan control item. 08. [Change] Request By: BIOS RD Rany Changed: Support Cascadelake CPU N SKU speed select BP and C SKU speed select PP feature. Verify: BIOS QT Test Proposal: Check speed select feature. 09. [Changed] Request By: BIOS RD Rany Changed: Update "Mac2Uuid" module version up to v001.000. Verify: BIOS QT Test Proposal: System will not hang after disable onboard LAN. 10. [Changed] Request By: BIOS RD Rany Changed: Setup PCIe name follow new rule. Verify: BIOS QT Test Proposal: Check this symptom. 11. [Change] Request By: BIOS RD Eddie Changed: Follow new rule ASPM item combine to global one. Verify: BIOS QT Test Proposal: Check BIOS without fan control item. (2) Note 01. BIOS image filename: 2P621WS2.15 Engineer Name : Levi Yang Release Date : Wed 07-01-2020 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 214 BIOS Version : L2.14 BIOS Changes : (1) Modifications: 01. [Changed] Request By: BIOS RD Eddie Changed: Update Microcode to 50654/02000065, 50656/0400002c, 50657/0500002c. Verify: BIOS QT Test Proposal: Check Microcode version on Main page. 02. [Changed] Request By: BIOS RD Rany Changed: Update "FruToSmbios123ByPcd" module to v0.05. Verify: BIOS QT Test Proposal: Check project name of POST and SETUP with followng actions... a. Set FRU - BaseBoardProductName = empty to check project, it should be the same as project default name. (FruWrite E) b. Set FRU - BaseBoardProductName = 'Hello' to check project, it should be changed to 'Hello'. (FruWrite BPN=HELLO) 03.[Change] Request By: BIOS RD Rany Changed: Update VROC driver for screen broken issue. Verify by: BIOS QT Test Proposal: Check VROC/VMD function. 04.[Change] Request By: BIOS RD Rany Changed: Add Customer patch for LSI 9361/9341. Verify by: N/A Test Proposal: N/A 05.[Fixed] Request By: BIOS RD Rany Symptom: Build fail with Build Tool 34. Root Cause: Error with Rule_Override in ASRockModulePkg module.sdl. Solution: Remove Rule_Override. Verify: N/A Test Proposal: N/A 06.[Change] Request By: BIOS RD Rany Changed: Remove redefine token. Verify by: N/A Test Proposal: N/A (2) Note 01. BIOS image filename: 2P621WS2.14 Engineer Name : Ryan Chang Release Date : Mon 01-06-2020 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 213 BIOS Version : L2.13 BIOS Changes : (1) Modifications: 01. [Changed] Request By: FW Jeff. Changed: Don't sync Type2 BaseBoardAssetTag, Type3 ChassisManufacturer and ChassisAssetTag from FRU. Verify By: BIOS-QT Test Proposal: Use AMIDE tool to check below SMBIOS field: EX: AMIDEDOS /BT --- Type2 BaseBoardAssetTag = ' ' AMIDEDOS /CM --- Type3 ChassisManufacturer = 'To Be Filled By O.E.M.' AMIDEDOS /CA --- Type3 ChassisAssetTag = 'To Be Filled By O.E.M.' 02. [Changed] Request By: BIOS Eddie for Vietnam’s factory. Changed: Update Mac2Uuid Module which uses new way to program UUID from MAC. Verify By: BIOS QT Test Proposal: Please refer to following test SOP. \\Ar-file-01\fwqt\Validation_SOP\BIOS\Server_BIOS QT_SOP_New\MAC UUID test.docx 03. [Fixed] Request By: EP2C621D12-WS[0173] Symptom: [CLX] "Waiting for BMC Initializing" appears during each time to reset SUT. Root Cause: Didn't hide string when bmc was ready. Solution: Hide string when bmc was ready. Verify: BIOS QT Test Proposal: Check light screen will not show any "Waiting for BMC Initializing" when bmc was ready. 04. [Fixed] Request By: EP2C621D12-WS[0175] Symptom: POST Screen Format it should show "Press F6 to Instant Flash" Root Cause: Missing string at uni file Solution: Adding string back to file Test Proposal: Check POST Screen show "Press F6 to Instant Flash" (2) Note 01. BIOS image filename: 2P621WS2.13 Engineer Name : Levi Yang Release Date : Tue 10-22-2019 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 212 BIOS Version : L2.12 BIOS Changes : (1) Modifications: 01. [Fixed] Request By: BIOS RD Rany Symptom: OnBoard Lan is above 4G Root Cause: Skip PHY LAN when force below 4G. Solution: Force lan to below 4G. Verify: QT Test Proposal: Check it can burn Lan MAC and Lan loopback can pass under DOS. 02. [Fixed] Request By: SE550 (HULK) Bug[0038] Symptom: Use "S_BMCMAC"(v0.37) to update BMC MAC finish, reboot System not countdown 90 sec Root Cause: If system didn't power on fron AC off, it didn't wait for BMC. Solution: Remove check system power on from AC off. Verify: BIOS QT Test Proposal: Check Use "S_BMCMAC"(v0.37) to update BMC MAC finish, reboot System will countdown 90 sec. 03. [New] Request By: BIOS RD Rany Changes: Also skip Intel Lan Module When boot from MFG mode Verify: BMC QT Test Proposal: 1. Remove system lan mac backup in BMC 2. Boot at MFG mode 3. check system lan mac will not backup to BMC 03. [New] Request By: BIOS Leader Eddie Changes: Show string "UEFI/BIOS is working in MFG mode." when system in MFG mode. Verify: BIOS QT Test Proposal: Check system will show string "UEFI/BIOS is working in MFG mode." in MFG mode. (2) Note 01. BIOS image filename: 2P621WS2.12 Engineer Name : Levi Yang Release Date : Wed 08-21-2019 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 211 BIOS Version : L2.11 BIOS Changes : (1) Modifications: 01. [Change] Request By: BIOS Leader Eddie Changed: Update microcode to fix Intel RIDL/Fallout security issue (Intel SA-00233). Verify by: BIOS QT Test Proposal: Check the microcode version is 0x0200005E with SKX CPU. 02. [Fixed] Request By: EP2C621D16GM2 Bug[0063] Symptom: When the system set "User Password" mode, check BIOS setup "Boot Override" cannot be selected. Root Cause: Gray out "Boot Override" when user password set. Solution: Remove grayoutif for "User Password". Verify: BIOS QT Test Proposal: When the system set "User Password" mode, check BIOS setup "Boot Override" can be selected. 03. [Fixed] Report By: EP2C621D16-4LP Bug[0173] Symptom: Follow SOP Security page "Secure Boot State" and "Vendor Keys" should be removed. Solution: Remove "Secure Boot State" and "Vendor Keys". Verify by: BIOS QT Test Proposal: Check items "Secure Boot State" and "Vendor Keys" have been removed. 04. [Fixed] Report By: EP2C621D16-4LP Bug[0227] Symptom: Resume from S4, system sometimes will appear blue screen. Solution: Update SATA driver to v6.1.0.1017. Verify by: BIOS QT Test Proposal: Install Intel RSTe 6.1 PV driver, and resume from S4. Check system will not blue screen. 05. [New] Request By: BIOS Leader Eddie Changes: Update SMBIOS type 1, 2, and 3 from FRU. Verify By: BIOS QT Test Proposal: Boot to DOS and execute frutool.exe to write data to FRU. For example, frutool id=0 BMF=ASRock_BMF. Reboot and use RU.exe to check SMBIOS type 1, 2, and 3 are changed to the data you wrote in. SMBIOS Type1: SystemManufacturer (from FRU PMF) SystemProductName (from FRU PPN) SystemVersion (from FRU PPV) SystemSerialNumber (from FRU PSN) Type2: BaseBoardManufacturer (from FRU BMF) BaseBoardProductName (from FRU BPN) BaseBoardVersion (from FRU BPA) BaseBoardSerialNumber (from FRU BSN) BaseBoardAssetTag (from FRU PAT) Type3: ChassisManufacturer (from FRU PMF) ChassisVersion (from FRU CPN) ChassisSerialNumber (from FRU CSN) ChassisAssetTag (from FRU PAT) 06. [Fixed] Request By: EP2C621D16HM2-M3 Bug[0030] Symptom: tool read speed 2934. Solution: Modify clock speed to 2933 when clock speed is 2934. Verify: QTC Test Proposal: Excute tool dimmfull.exe under DOS, and check it will show pass. 07. [Change] Request By: BIOS Leader Eddie Changes: Make UUID Value can changed by user. Verify: BIOS QT Test Proposal: 1. Default UUID value is Lan Mac address. 2. Set {0,2,0,3,0,4,0,5,0,6,0,7,0,8,0,9} or {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}. 3. UUID will set back to Lan Mac address 4. Set other value then UUID will keep what you key-in. 08. [New] Changes: Add new setup item - "Load BMC Default Settings", it can load BMC setting to default. Verify By: BIOS QT Test Proposal: 01. Open the browser to login BMC Web, such as 192.168.36.15 02. Change and Save the setting on BMC Web, such as IPv6 disabled (#settings/network/ip) 03. Boot to BIOS setup, press the item "Load BMC Default Settings" (Sever Mgmt->BMC Tools) 04. Once "Load BMC Default Settings SUCCESS!", re-open the browser to check if IPv6 enable in the case. (2) Note 01. BIOS image filename: 2P621WS2.11 Engineer Name : Levi Yang Release Date : Fri 06-14-2019 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 205 BIOS Version : L2.05 BIOS Changes : (1) Modifications: 01. [Fixed] Request By: EP2C621D12 WS R2.00 Bugs[0104] Symptom: [CLX] Onboard LAN set "Disabled", check "Boot From Onboard LAN" will not disappear. Root Cause: Not Hide item when lan disable. Solution: Add Code to hide BFOL when lan disable. Verify: BIOS QT Test Proposal: Check this symptom. (2) Note 01. BIOS image filename: 2P621WS2.05 Engineer Name : Levi Yang Release Date : Mon 04-01-2019 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 204 BIOS Version : L2.04 BIOS Changes : (1) Modifications: 01. [Change] Request By: BIOS RD Levi Changes: Sync code with AMI PurleyCrb_Refresh_043(RC v0576.D20). Verify: N/A Test Proposal: N/A 02. [Fixed] Request By: BIOS RD Levi Symptom: BMCSMI function can't work. Root Cause: AMI modify SMBIOS entry pointer, it doesn't be initialized when executing BMCSMI function. Solution: Move init code to GetSmbiosPointers() function. Verify: N/A Test Proposal: N/A 03. [Fixed] Request By: EP2C622D16NM Bug[0161][0162] Symptom: Smbiosck check fail. Function call 0x52 error: Set Product Name incorrect! Root Cause: AMI add SmbiosTableEnd condition at while loop, it will not get in when using function 52 to access smbios. Solution: Remove this condition. Verify: N/A Test Proposal: N/A 04. [Fixed] Request By: EP2C622D16NM Bug[0177] Symptom: Wait for BMC test fail. Root Cause: BIOS didn't implement it. Solution: Add code to support it. Verify: N/A Test Proposal: N/A 05. [Fixed] Request By: EP2C622D16NM Bug[0171] Symptom: Network Stack configuration page can't test. Root Cause: No test SOP. Solution: Remove this page for now. Expect to add it back when we get the test SOP. Verify: N/A Test Proposal: N/A 06. [Fixed] Request By: EP2C622D16NM Bug[0180] Symptom: Password size is 8, it should be 16. Root Cause: PASSWORD_MAX_SIZE is 8. Solution: Modify PASSWORD_MAX_SIZE to 16. Verify: N/A Test Proposal: N/A 07. [Fixed] Request By: EP2C622D16NM Bug[0178] Symptom: SATA/sSATA Controller port name string is without "(AHCI)" in AHCI mode. Root Cause: BIOS didn't implement it. Solution: Add code to support it. Verify: N/A Test Proposal: N/A 08. [Change] Request By: BIOS RD Levi Changes: Remove IPV6 function for now, expect to add it back when the IPV6 function is validated. Verify: N/A Test Proposal: N/A 09. [Fixed] Request By: EP2C622D16NM Bug[0161][0162] Symptom: Type 16 Number of Memory Devices != DIMM Slot Number Root Cause: Intel RC modify the computing way of Number of Memory Devices. Solution: Modify code to follow Intel RC design. Verify: N/A Test Proposal: N/A 10. [Change] Request By: BIOS RD Levi Changes: Add ADDDC and SDDC+1 SEL in BMC web and dmesg in Linux. Verify: N/A Test Proposal: N/A (2) Note 01. BIOS image filename: 2P621WS2.04 Engineer Name : Levi Yang Release Date : Thu 03-21-2019 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 203 BIOS Version : L2.03 BIOS Changes : (1) Modifications: 01. [Change] Request By: BIOS RD Nick Changes: Sync code with AMI PurleyCrb_Refresh_041B(RC v0571.D03). Verify: N/A Test Proposal: N/A 02. [Fixed] Report By: TSD Nathan Symptom: When using R2.X MB will randomly happen cpu one core full loading. Root Cause: GPP_C14 has SCI setting. Solution: Remove any Interrupt on GPP_C14. Verify by: N/A Test Proposal: N/A 03. [Fixed] Report By: BIOS RD Nick Symptom: SMBIOS Type 9 usage will show "In use" when unplug any device. Solution: Smbios type override for pch device. Verify by: N/A Test Proposal: N/A 04. [New] Request By: BIOS RD Nick Changes: Add Ipv6 support. Verify: N/A Test Proposal: N/A (2) Note 01. BIOS image filename: 2P621WS2.03 Engineer Name : Levi Yang Release Date : Wed 02-20-2019 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 202 BIOS Version : L2.02 BIOS Changes : (1) Modifications: 01. [Change] Request By: BIOS RD Nick Changes: Sync code with AMI PurleyCrb_Refresh_039(RC v0566.D03). Verify: N/A Test Proposal: N/A 02. [Change] Request By: BIOS RD Nick Changes: Update "AmiTsePkg" Module Verify: N/A Test Proposal: N/A 03. [Fixed] Request By: BIOS RD Charlie Jiang Symptom: Password can set smaller than password minimal size. Root Cause: When password length set smaller than password minimal size will show warning message been removed. Solution: Modify Password setting follow ASRR rule Verify: N/A Test Proposal: N/A 04. [Change] Request By: BIOS RD Nick Changes: Modify wait for BMC to DXE phase after AC Power lose Verify: N/A Test Proposal: N/A 05. [New] Request By: BIOS RD Nick Changed: When into "Manufacture Mode" skip "Wait for BMC", "Backup Bmc Mac" and "Updatefruinfo" Verify: N/A Test Proposal: N/A 06 [New] Request By: BIOS RD Tina Changes: Add item "Intel Speed Select" in page "CPU Configuration" Verify: N/A Test Proposal: N/A 07. [Change] Request By: BIOS RD Nick Changes: Add "DCPMM" information on Main page. Verify: N/A Test Proposal: N/A 08. [Fixed] Report By: EP2C621D16-4LP Bug[0194] Symptom: When execute UEFI PXE, advance page has Ipv4 and Ipv6 configuration. Solution: Disable "VLanConfigDxe_SUPPORT" and "NWSTACK_CONFIGURE_IP". Verify by: N/A Test Proposal: N/A 09. [Change] Report By: EP2C621D16-4LP Bug[0197][0198] Changes: Adding code to support 2933 DIMM Verify by: N/A Test Proposal: N/A 10. [Fixed] Request By: EPC621D6I Bug[0011] Symptom: BIOS setup main page information appear "Dual-Channel Memory Mode". Root Cause: If Dimm present, total number of dimm will plus one (include error dimm). Solution: Total number of dimm plus one when dimm is enable. Verify: N/A Test Proposal: N/A 11. [Fixed] Request By: EP2C621D16-4LP Bug[0154] Symptom: NMI test under DOS is fail. Solution: Change using OemNmiButton module to trigger NMI function Verify: N/A Test Proposal: N/A 12. [Change] Request By: BIOS RD Ryan Changes: Update "PcieInfoJudge" Module to v1.01 Verify: N/A Test Proposal: N/A 13. [Fixed] Request By: EPC621D6I Bug[0043] Symptom: User Password test fail. Root Cause: Grayout "USB Device BBS Priorities" Solution: Remove grayoutif for "USB Device BBS Priorities" Verify: N/A Test Proposal: N/A 14. [Fixed] Request By: BIOS RD Charlie Jiang Symptom: Password can set smaller than password minimal size. Root Cause: When password length set smaller than password minimal size will show warning message been removed. Solution: Modify Password setting follow ASRR rule Verify: N/A Test Proposal: N/A 15. [New] Request By: BIOS RD Rany Changes: Support Userprofile feature. Verify: N/A Test Proposal: N/A (2) Note 01. BIOS image filename: 2P621WS2.02 Engineer Name : Levi Yang Release Date : Thu 01-24-2019 ;-----------------------------------------------------------------------; Project Name : EP2C621D12 WS Project Build : 201 BIOS Version : L2.01 BIOS Changes : (1) Modifications: 01. First Release, based on EP2C621D16-4LP L2.02 (AMI PurleyCrb_Refresh_037 [RC v0561.D09]) (2) Note 01. BIOS image filename: 2P621WS2.01 Engineer Name : Levi Yang Release Date : Fri 12-21-2018 ;-----------------------------------------------------------------------;