+----------------------------------------------------------------------+ | BIOS Release History | +----------------------------------------------------------------------+ | Project Name : EPC621D4I-2M | | CPU : Skylake-SP | | Chipset : CASCADELAKE | | Super I/O : NCT5573 | | BMC : AST2500 | | Flash Part : Winbond W25Q256JVFQ | | : MXIC MX25L25635FMI-10G | +----------------------------------------------------------------------+ | [VGA] | | ASPEED VGA (Legacy) : 1.08.00 | | (UEFI) : 1.08.00 | | [Storage] | | Intel RAID : 6.1.0.1017 | | [LAN] | | Intel X722 (PXE) : v1.1.02 | | (UEFI) : v3.3.37 | | [Others] | | DCPMM Drirvers : 01.00.00.3429 | +----------------------------------------------------------------------+ | RC Version : 0576.D20 | | SPS FW Version : 04.01.04.256 | +----------------------------------------------------------------------+ | Redfish Version : N/A | | Support Redfish Inventory : No | | Redfish Inventory Version : N/A | +----------------------------------------------------------------------+ | CPU Microcode | | SKX-H0 : 50654_02000065 | | CLX-A0 : 50655_03000010 | | CLX-B0 : 50656_0400002C | | CLX-B1 : 50657_0500002C | +----------------------------------------------------------------------+ | Update Tool : wIFUPack | | : AfuEfix64 v5.11.00.1727 | | : AFUWINx64 v5.11.00.1727 | | : afulnx_64 v5.11.00.1727 | | Support Tool : SceEfi v5.03.1111 | | : SceLnx v5.03.1111 | | : SceWin v5.03.1111 | +----------------------------------------------------------------------+ | Aptio 5.014 | | VeB Version : Aptio 7.19.0628 (A5 33) | +----------------------------------------------------------------------+ ;-----------------------------------------------------------------------; Project Name : EPC621D4I-2M Project Build : 231 BIOS Version : L2.31 BIOS Changes : (1) Modifications: 01. [Changed] Request By: BIOS RD Eddie Changed: Update Microcode to 50654/02000065, 50656/0400002c, 50657/0500002c. Verify: BIOS QT Test Proposal: Check Microcode version on Main page. 02. [Changed] Request By: BIOS RD Rany Changed: Update "Mac2Uuid" module to v1.06. Verify: BIOS QT Test Proposal: Please refer to following test SOP. \\Ar-file-01\fwqt\Validation_SOP\BIOS\Server_BIOS QT_SOP_New\MAC UUID test.docx 03. [Changed] Request By: BIOS RD Rany Changed: Update "FruToSmbios123ByPcd" module to v0.05. Verify: BIOS QT Test Proposal: Check project name of POST and SETUP with followng actions... a. Set FRU - BaseBoardProductName = empty to check project, it should be the same as project default name. (FruWrite E) b. Set FRU - BaseBoardProductName = 'Hello' to check project, it should be changed to 'Hello'. (FruWrite BPN=HELLO) 04. [Change] Request By: BIOS RD Rany Changes: Hide wait for bmc string when bmc is ready Verify: BIOS QT Test Proposal: If BMC is ready, wait for bmc string is hidden in lightscreen. 05.[Change] Request By: BIOS RD Rany Changed: Add Customer patch for LSI 9361/9341. Verify by: N/A Test Proposal: N/A 06.[Fixed] Request By: BIOS RD Rany Symptom: Build fail with Build Tool 34. Root Cause: Error with Rule_Override in ASRockModulePkg module.sdl. Solution: Remove Rule_Override. Verify: N/A Test Proposal: N/A 07.[Change] Request By: BIOS RD Rany Changed: Remove redefine token. Verify by: N/A Test Proposal: N/A (2) Note 1. BIOS image filename: P621D4M2.31 2. BMC firmware version: EPC621D4I-2M_L1.51.00.ima Engineer Name : Ryan Chang Release Date : Fri 01-03-2020 ;-----------------------------------------------------------------------; Project Name : EPC621D4I-2M Project Build : 221 BIOS Version : L2.21 BIOS Changes : (1) Modifications: 01.[Fixed] Request By: EPC621D4I-2M Bug[0095] Symptom: BIOS H/W Monitor & BMC Web Fan sensor name not match MB silkscreen Solution: Modify Fan name to match MB. Verify: BMC QT Test Proposal: Check BIOS H/W Monitor. 02.[Fixed] Request By: EPC621D4I-2M Bug[0106] Symptom: System will not countdown 90sec after update BMC MAC via tool "S_BMCMAC.exe" under DOS. Root Cause: If system didn't power on fron AC off, it didn't wait for BMC. Solution: Remove check system power on from AC off. Verify: BIOS QT Test Proposal: Check Use "S_BMCMAC"(v0.37) to update BMC MAC finish, reboot System will countdown 90 sec. 03.[Fixed] Request By: EPC621D4I-2M Bug[0074] Symptom: System Inventory - PCIE M.2 can not get devices information Root Cause: M.2 root bridge device number is 0x1B, but it will be skip. Solution: Add 0x1B in function. Verify: BMC QT Test Proposal: Plug device in M.2 and check System Inventory can see the SLIM3. 04.[Fixed] Request By: BIOS RD Rany Symptom: OnBoard Lan is above 4G Root Cause: Skip PHY LAN when force below 4G. Solution: Force lan to below 4G. Verify: QT Test Proposal: Check it can burn Lan MAC and Lan loopback can pass under DOS. 05.[Change] Request By: BMC RD Woody Changed: Modify Get MAC command. Verify by: BIOS QT Test Proposal: Check MAC is eth1 MAC in BIOS page. (2) Note 1. BIOS image filename: P621D4M2.21 2. BMC firmware version: EPC621D4I-2M_L1.51.00.ima Engineer Name : Tina Tseng Release Date : Thu 08-29-2019 ;-----------------------------------------------------------------------; Project Name : EPC621D4I-2M Project Build : 211 BIOS Version : L2.11 BIOS Changes : (1) Modifications: 01. [New] Request By: BIOS Leader Eddie Changes: Add module "FruToSmbios123ByPcd". Verify: BIOS QT Test Proposal: (a). When FRU has data, SMBIOS will be sync with FRU. (b). When FRU has no data, SMBIOS will be determined by BIOS token. Support list: Type1: SystemManufacture, SystemProductName, SystemVersion, SystemSerialNumber, SystemUuid Type2: BaseBoardManufacturer, BaseBoardProductName, BaseBoardVersion, BaseBoardSerialNumber, BaseBoardAssetTag Type3: ChassisManufacturer, ChassisVersion, ChassisSerialNumber, ChassisAssetTag 02.[New] Request By: BIOS Leader Eddie Changes: Add new setup item - "Load BMC Default Settings", it can load BMC setting to default. Verify By: BIOS QT Test Proposal: 01. Open the browser to login BMC Web, such as 192.168.36.15 02. Change and Save the setting on BMC Web, such as IPv6 disabled (#settings/network/ip) 03. Boot to BIOS setup, press the item "Load BMC Default Settings" (Sever Mgmt->BMC Tools) 04. Once "Load BMC Default Settings SUCCESS!", re-open the browser to check if IPv6 enable in the case. 03.[Change] Request By: BIOS Leader Eddie Changed: Update microcode to fix Intel RIDL/Fallout security issue (Intel SA-00233). Verify by: BIOS QT Test Proposal: Check the microcode version is 0x0200005E with SKX CPU. 04.[Fixed] Request By: EP2C621D16GM2 Bug[0063] Symptom: When the system set "User Password" mode, check BIOS setup "Boot Override" cannot be selected. Root Cause: Gray out "Boot Override" when user password set. Solution: Remove grayoutif for "User Password". Verify: BIOS QT Test Proposal: When the system set "User Password" mode, check BIOS setup "Boot Override" can be selected. 05.[Fixed] Report By: EP2C621D16-4LP Bug[0173] Symptom: Follow SOP Security page "Secure Boot State" and "Vendor Keys" should be removed. Solution: Remove "Secure Boot State" and "Vendor Keys". Verify by: BIOS QT Test Proposal: Check items "Secure Boot State" and "Vendor Keys" have been removed. 06.[Fixed] Report By: EP2C621D16-4LP Bug[0227] Symptom: Resume from S4, system sometimes will appear blue screen. Solution: Update SATA driver to v6.1.0.1017. Verify by: BIOS QT Test Proposal: Resume from S4, and system will not blue screen. 07.[Fixed] Request By: EPC621D4I-2M Bug[0072] Symptom: Plug DDR4_2133, and check System Inventory will show 0 MT/s. Root Cause: Read SPD and commonTck didn't match DDR_2133_TCK_MIN. Solution: If commonTck between DDR_2000_TCK_MIN and DDR_2133_TCK_MIN set frequency to 2133. Verify: BMC QT Test Proposal: Check System Inventory when plug DDR4-2133. 08.[Fixed] Request By: BIOS RD Tina Symptom: BMC Netwwork page only has item "BMC Out of band Access" Root Cause: BMC setting from bonding disable to bonding enable. Solution: Didn't hide eth0. Verify: BIOS QT Test Proposal: Check BMC Netwwork page can see BMC IP information. 09.[Fixed] Request By: BIOS RD Tina Symptom: "BMC Out of band Access" cannot work. Root Cause: BMC setting from bonding disable to bonding enable. Solution: Modify getOOBValue command from get eth1 OOB Value to get eth0 OOB Value. Verify: BIOS QT Test Proposal: Check item "BMC Out of band Access". (2) Note 1. BIOS image filename: P621D4M2.11 2. BMC firmware version: EPC621D4I-2M_L1.12.00.ima Engineer Name : Tina Tseng Release Date : Fri 05-31-2019 ;-----------------------------------------------------------------------; Project Name : EPC621D4I-2M Project Build : 202 BIOS Version : L2.02 BIOS Changes : (1) Modifications: 01.[Fixed] Request By: BIOS RD Charlie Symptom: BMCSMI function can't work. Root Cause: AMI modify SMBIOS entry pointer, it doesn't be initialized when executing BMCSMI function. Solution: Move init code to GetSmbiosPointers() function. Verify: N/A Test Proposal: N/A 02.[Fixed] Request By: EP2C622D16NM Bug[0161][0162] Symptom: Smbiosck check fail. Function call 0x52 error: Set Product Name incorrect! Root Cause: AMI add SmbiosTableEnd condition at while loop, it will not get in when using function 52 to access smbios. Solution: Remove this condition. Verify: N/A Test Proposal: N/A 03.[Fixed] Request By: EP2C622D16NM Bug[0177] Symptom: Wait for BMC test fail. Root Cause: BIOS didn't implement it. Solution: Add code to support it. Verify: N/A Test Proposal: N/A 04.[Fixed] Request By: EP2C622D16NM Bug[0171] Symptom: Network Stack configuration page can't test. Root Cause: No test SOP. Solution: Remove this page for now. Expect to add it back when we get the test SOP. Verify: N/A Test Proposal: N/A 05.[Fixed] Request By: EP2C622D16NM Bug[0180] Symptom: Password size is 8, it should be 16. Root Cause: PASSWORD_MAX_SIZE is 8. Solution: Modify PASSWORD_MAX_SIZE to 16. Verify: N/A Test Proposal: N/A 06.[Fixed] Request By: EP2C622D16NM Bug[0178] Symptom: SATA/sSATA Controller port name string is without "(AHCI)" in AHCI mode. Root Cause: BIOS didn't implement it. Solution: Add code to support it. Verify: N/A Test Proposal: N/A 07. [Change] Request By: BIOS RD Charlie Changes: Remove IPV6 function for now, expect to add it back when the IPV6 function is validated. Verify: N/A Test Proposal: N/A 08.[Fixed] Request By: EP2C622D16NM Bug[0175] Symptom: InstantFlash and wIFUPack can downgrade from CascadeLkae to Purley. Root Cause: BIOS didn't stop it. Solution: Add code to stop downgrading BIOS from CascadeLake to Purley. Verify: N/A Test Proposal: N/A 09. [Change] Request By: BIOS RD Charlie Changes: Sync code with AMI PurleyCrb_Refresh_043(RC v0576.D20). Verify: N/A Test Proposal: N/A (2) Note 1. BIOS image filename: P621D4M2.02 2. BMC firmware version: EPC621D4I-2M_L0.08.00.ima Engineer Name : Tina Tseng Release Date : Thu 03-21-2019 ;-----------------------------------------------------------------------; Project Name : EPC621D4I-2M Project Build : 201 BIOS Version : L2.01 BIOS Changes : (1) Modifications: 01. First Release, based on EP2C621D16-4LP L2.06. 02. [Change] Request By: BIOS RD Charlie Changes: Remove Wait for BMC at PEI phase. Verify: N/A Test Proposal: N/A 03. [Change] Request By: BIOS RD Charlie Changes: Remove no used item "Static Virtual Lockstep Mode" and "Data Scrambling for NVMDIMM". Verify: N/A Test Proposal: N/A 04. [Change] Request By: BIOS RD Charlie Changes: Update BCK file to support Patrol Scrub and Data Scrambling. Verify: N/A Test Proposal: N/A 05. [Change] Request By: BIOS RD Charlie Changes: Add ADDDC and SDDC+1 SEL in BMC web and dmesg in Linux. Verify: N/A Test Proposal: N/A (2) Note 1. BIOS image filename: P621D4M2.01 2. BMC firmware version: EPC621D4I-2M_L0.08.00.ima Engineer Name : Tina Tseng Release Date : Tue 03-12-2019 ;-----------------------------------------------------------------------;