The whole commands that IPMICFG tool provide are as follows.

Usage: IPMICFG <Parameters> (EX: ipmicfg -raw 18 1)
  -raw                  Send a RAW IPMI request and print response.
                        Format: NetFn Cmd [Data1 ... DataN]						
  -m                    Show IP and MAC.
  -m <IP>               Set IP (format: ###.###.###.###).
  -k                    Show Subnet Mask.
  -k <Mask>             Set Subnet Mask (format: ###.###.###.###).
  -dhcp                 Get the DHCP status.
  -dhcp on              Enable the DHCP.
  -dhcp off             Disable the DHCP.
  -g                    Show Gateway IP.
  -g <IP>               Set Gateway IP (format: ###.###.###.###).
  -r                    BMC cold reset.
  -garp on              Enable the Gratuitous ARP.
  -garp off             Disable the Gratuitous ARP.
  -fd                   Reset to the factory default.
  -ver                  Get Firmware revision.
  -vlan                 Get VLAN status.
  -selftest             Checking and reporting on the basic health of BMC.
  -fan                  Get the fan mode
  -sel info             Show SEL information.
  -sel list             Show SEL records.
  -sel del              Delete all SEL records.
  -sel raw              Show SEL raw data.
  -sdr info             Show SDR repository information.